CAST-X SERIES 1000 Circulation Heater
 This new circulation heater consists of a spiral-coiled tube set in an aluminum body with tubular heating elements. This construction offers many benefits over other circulation heaters because the aluminum mass maintains accurate and consistent temperature, allowing optimal temperature control. The aluminum body also efficiently conducts heat away from the tubular heating elements, which prolongs the heater's life. more>> |
LA Lead Adapter Improvements
 The new FIREROD-® Lead Adapter is now welded on all options, providing a pull strength two and a half times greater than the previous drilled connection. The new LA is applicable for almost any market and is the best option for applications that require minimum no-heat. This new construction is ideal for use in applications with extreme flexing and movement. This improved construction is available for the same cost. |
SERIES EHG
 Watlow has introduced a new closed loop integrated thermal solution known as the SERIES EHG. As an answer to the industry's need for a set point temperature control product with a longer life span, faster heat-up rates and improved accuracy, Watlow developed the SERIES EHG temperature control for evolving application requirements. The SERIES EHG includes a compact temperature control, thermocouple sensor and power switching device that are integrated into the heater's power cord. The SERIES EHG reduces system costs and substantially extends the life over conventional thermostat solutions. more>> |
Thick Film Heaters on Ceramic
 Thick film on aluminum nitride and alumina provide preferred heating elements resulting in temperature uniformity, quick response and stable physical properties. more>> |
UNIVERSAL SOLVENT Circulation Heater
 The UNIVERSAL SOLVENT circulation heater provides a safe and efficient means of heating low flash point solvents. more>> |
VERSALINE 500 In-Line Heater
 VERSALINE 500 is ideal for situations where a high-watt density circulation heater is required but space is limited because all the necessary components, including a FIREROD-® heater, inlet/outlet lines, thermocouple and tubing , are presented in a compact package. more>> |
ENVIROSEALTM RTD Sensors
 Watlow's patent pending ENVIROSEAL-TM cold end seal keeps contaminants from the RTD sensor, maintaining the integrity of the most demanding application. The cold end seal provides accurate, dependable measurements in a robust, vibration resistant design. more>> |
INFOSENSETM Sensors
 Watlow's new INFOSENSE-TM sensor technology instantly improves the accuracy of Watlow's existing thermocouple and RTD sensors by a minimum of 50 percent. Sensor characteristics are listed on small tags attached to each sensor. Users simply enter each value into a controller's memory through the controller's standard menu. Entering the codes immediately improves accuracy by at least 50 percent across the entire temperature range. INFOSENSE is available as a standard option on all catalog mineral insulated, general application and RTD sensors. It is also a standard option with Watlow's new SD controllers, and is available for a nominal fee on other Watlow sensors. more>> |
INFOSENSETM-P Sensors
 Watlow's new INFOSENSE-TM P plug and play technology provides even greater accuracy and convenience through automatically linking your application to Watlow's NIST-traceable calibration lab. The new INFOSENSE-P EEPROM (electronically erasable programmable read-only memory) contains the full calibration curve, as opposed to a limited amount of calibration data points, and is preprogrammed with each sensor's part number, manufacturing information and full range temperature calibration information. Utilization of INFOSENSE-P results in a sensor that is now as accurate as Watlow's NIST reference standard.more>> |
WATCOUPLE
 The new WATCOUPLE saves you money by not only reducing variation in your process, but also reducing process drift by lasting longer in the most demanding applications. Watlow's newest nonstandard thermocouple gives you a more accurate measurement and exhibits three times less drift as Type K thermocouples. The WATCOUPLE is available in all standard sizes and options.more>> |
CDN Gateway
CDN GATEWAY links DeviceNet-TM systems to a variety of Watlow controllers via their EIA\485 Modbus-TM interface. The CDN GATEWAY allows a DeviceNet-TM Master node to send and receive data using standard POLL or EXPLICIT messaging. This product is available from stock for quick shipment and is backed by warranties. |
DIN-A-MITE-® Power Controllers
 Watlow recently updated the DIN-A-MITE-® family of power controllers. The new line of controller is versatile, compact and environmentally safe. more>> |
EM GATEWAY: An Ethernet/Internet Connectivity Solution
 Watlow's EM GATEWAY serves as a bridge for Modbus-TM communication between Ethernet technology and Watlow's legacy standard controllers. The GATEWAY also provides a quick, convenient and economical means of adapting controllers to Ethernet connectivity. more>> |
PPC-2000 for Extrusion Control
 Watlow's solution for extrusion control provides integration houses with multiple benefits for control system upgrades or complete system rebuilds. Features include allowing staff to select the language they are most comfortable with for system setup; reducing time and cost during set-up, trouble-shooting and control system fine-tuning as well as allowing integration houses to maintain control of future program changes. more>> |
SERIES PD Controller
 Watlow's new SERIES PD controllers utilize embedded Ethernet technology to provide a convenient, economical means for setting up and viewing key process variables. The PD SERIES controllers provide high performance temperature and process control and are ideally suited for a broad range of applications where the I/O is supported from a remote location. more>> |
SERIES SD Controller
 Watlow's new SERIES SD controllers offer accurate, cost effective and reliable temperature control. The SERIES SD provides enhanced accuracy, an improved user interface display, faster update rates and expanded I/O capability. more>> |
SERIES SD31 Controller
 Watlow's new SERIES SD31 controllers feature INFOSENSE technology which improves accuracy by a minimum of 50 percent. The controllers offer a rapid sampling rate of 6.5Hz in the 1/32 DIN package as well as numerous user-friendly options such as factory or user defaults, display of process or set point values and flexible outputs. Optional EIA-485 communication allows users to configure, monitor and data log with such optional software products like WATVIEW. more >> |
